Solenoid Valve : Series A 3/4” BSP Inlet (Male) - 3/4” BSP Outlet (Male)
Suits models:
- BRIVIS CONTOUR L10, L10T, L11, L20, L20T, L21, L30, L31, L40, L41, L50, L51, L61
Specifications:
- Standard piping configurations are made to the inlet of the valve by connecting via the 3/4” BSP /NPT male thread connection. The piping connections to the outlet of the valve are made via a 10.5mm barb connection. This product has been designed to meet all requirements enabling it to be connected to a mains water supply provided it meets the Hydraulic Performance Criteria stated in this specification.
- For best performance especially at low pressures, the valve should be mounted in a horizontal position with the solenoid standing in an upright position.
- Standard electrical connections are made through the following options
- via the two 6.3mm tabs protruding from the valve. It is advisable to ensure that the electrical receptacles connecting the tabs are insulated.
- Though single or double insulated leads. The leads are 0.75mm 2 tin plated conductors.
- Standard lead length is 200mm, however any specific customer requirement can be met.
- Through DIN 43650 Form A / ISO 4400, EN175301 – 803:2000 specification
